P. 31
nanobox | tangerine User Manual
Dec 11, 2023
GLOBAL NANOBOX CONFIGURATION SETTINGS
The tangerine maintains a set of global parameters that are independent of any preset that
you might load. You can access all global parameters from a single place called the
nanobox Configuration screen.
To open the Nanobox Configuration Screen, open the Pads Home screen, then press the
Left Arrow button.
nanobox Configuration Screen
The number to the left of the clock on the nanobox Configuration screen is the version of
firmware that is running. Check the 1010music forum,
, to see
if there is a newer version available.
To change settings in the nanobox Configuration screen, scroll through the parameters
with the top Knob, highlight the parameter you want to edit, then change the setting with
the bottom Knob. The tangerine automatically saves the new setting. You do not have to
save it manually.
When you are done, exit the nanobox Configuration screen either by pressing the Right
Arrow button to return to the Pads Home screen, or by holding the Home button to open
the Teleporter pop-up. The following table describes each of the tangerine’s global
parameters.
Global nanobox Configuration Settings
Parameter
Description
Volume
The volume of the audio output.
Range: 0 to 100%
Brightness
The brightness of the touchscreen.
Range: 0 to 100%
