P. 39
nanobox | tangerine User Manual
Dec 11, 2023
ADJUST FX 2: REVERB SETTINGS
Press the Layer button while on the FX 1 Delay screen to open the FX 2: Reverb screen. Here
you can add some reverb to a pad to lengthen the sound.
Turn the top knob to choose a parameter, then turn the bottom knob to select a value. The
following table describes each parameter.
Use longer values of Decay to make the sound trail on longer after the initial hit. Increase
the Damping to reduce the airiness or hissing at the end of the sound. Use the Pre-delay to
add some time between the initial hit and when you hear the echo.
Setting
Description and Range
Decay
How much the reverberation will ring out.
Range: 0 to 100%. Accepts modulation.
Pre-Delay
The amount of time between the original dry sound, and the
audible onset of early reflections.
Range: 0 to 100%. Accepts modulation.
Damping
How much damping is applied to the reverb. Higher values will
make the reverb end sooner.
Range: 0 to 100%. Accepts modulation.
FX 2: Reverb
