manualshive.com logo in svg

1010 Music nanobox tangerine, User Manual


Share
Download
background image

P. 29 

nanobox | tangerine User Manual

Dec 11, 2023

SAVING YOUR CHANGES AS A NEW PRESET

Presets are not automatically saved, so when you load another preset or power down the 
nanobox, any unsaved changes will be lost.  

Rather than save your changes to the original preset on the microSD card, you may save a 
copy of the current preset that includes any changes you made to the pads, sequences, 
and effects. 

1. 

Push the Home button until you see the Pads Home screen. 

2. 

Touch the name of the preset in the header to open the Presets Screen. 

3. 

Touch File to open the File menu. 

4. 

Touch Save As. This will open the File Naming screen, as shown below.

File Naming Screen

nanobox

CURSOR

Twist to 

change cursor 

position

ENTER

Touch to save 

the name.

CLEAR

Touch to erase 

the blank 

name field.

CANCEL

Touch to abort 

changing the 

name.

CHARACTER

Twist to scroll 

through 

characters 

arcade style.

BACK SPACE

Touch to erase the 

character behind the 

cursor.

KEYBOARD

Touch to enter 

characters. A stylus 

can help here.

KEYBOARD 

SELECTOR

Touch to switch 

to number 

keyboard.

CAPS LOCK

Touch to switch 

between upper 

and lower case 

letters.

Summary of Contents for nanobox tangerine










































































































































Reviews:

No comments

Related manuals for nanobox tangerine

Brands by name

Popular brands

Load more brands