P. 32
nanobox | tangerine User Manual
Dec 11, 2023
Global Nanobox Settings (continued)
Parameter
Description
Compressor
When On, an audio compressor is applied to limit the Line Out signal
to avoid clipping.
Options: On, Off
MIDI GlobIn
Specifies the MIDI channel a MIDI controller must use to trigger each
pad with a specific key, or to send MIDI data that can be used for
modulating the FX1 Delay and FX2 Reverb effects.
GlobIn has no impact on playing individual pads over specific MIDI
channels.
Options: none, 1-16, Omni
MIDI CC In
Specifies the MIDI channel for controlling the parameters of individual
Pads.
This parameter has no impact on triggering or playing pads over MIDI.
Options: none, 1-16, Omni
MIDI
ProgChg
When set to ON, the tangerine will respond to MIDI Program change
messages on the MIDI In channel by advancing to the corresponding
preset. Presets are mapped to MIDI Channels in alphabetical order, as
listed on the Presets screen.
Options: On, Off
MIDI Thru
When On, the tangerine uses its MIDI Out to re-transmit MIDI
messages received at its MIDI In connection. When Off, the tangerine
only uses MIDI Out to re-transmit inbound MIDI Clock, Start, Stop, and
Continue messages.
MIDI ClkRcv
When enabled, the tangerine accepts MIDI Clock, Start, Stop, and
Continue messages received over its MIDI In connection.
Analog ClkIn
If you are synchronizing with an analog clock, the tangerine needs to
know how many clock pulses to expect per quarter note. You can set
that here.
Options: 1, 2, 4, 8, 12 or 24 PPQ.
Rec Config
Specifies if recording settings are global or per-pad.
Rec Mon
Specifies if the tangerine mixes incoming line audio with its line
output audio. When On, incoming audio is always audible. When
Auto, incoming audio is audible during sample recording operations.
When Off, the tangerine does not mix incoming audio with its line
output.
Lead In
When On, the tangerine waits 4 beats and plays a count-in before
recording starts. It displays the countdown as a negative number in
the Transport clock.
SD Mode
Troubleshooting option for handling microSD issues.
