P. 118
nanobox | tangerine User Manual
Dec 11, 2023
TRIGGERING PADS FROM SPECIFIC NOTES ON THE MIDI
GLOBIN CHANNEL
You can use a MIDI controller to trigger pads at their default note, just as you might trigger
them from the PADS HOME screen. For this purpose, each pad has a specific note assigned
to it.
By default, pads 1-8 are assigned to MIDI notes 36-43 (C2-G2) as shown in the following
table.
You can trigger each pad from its assigned note if your MIDI controller sends MIDI notes on
a specific channel called the MIDI GlobIn channel, configured on the tangerine in the
nanobox Configuration page. When you play pads this way, their samples are played at the
pitches at which they were recorded.
You can override the default note for any pad through the Pad Note parameter in its Pad
Configuration page.
Note:
MIDI GlobIn is a global parameter. It does not change when you load presets and is
independent of the pad-specific MIDI settings stored with presets.
Pad
Default Pad Note
MIDI Note
Number
1
C2
36
2
C#2
37
3
D2
38
4
D#2
39
5
E2
40
6
F2
41
7
F#2
42
8
G2
43
Default Pad Notes in GlobIn
