P. 73
nanobox | tangerine User Manual
Dec 11, 2023
Enable Looping in Sample Pad Mode
To set up sample loops for playback in Sample Pad Mode:
1.
Open the Pad Position Parameters screen.
2.
Select and change the Loop Mode parameter to either Forward or Bidirect.
This enables looping on this pad and also specifies if the sample should play
repeatedly from the the Loop Start point to the Loop End point (Loop Mode =
Forward) or it should alternate between playing the sample from Loop Start to Loop
End and then playing in reverse from the Loop End to Loop Start (Loop Mode =
Bidirect).
3.
Play the pad and notice that, by default, the entire sample loops while you play a
note.
