P. 67
nanobox | tangerine User Manual
Dec 11, 2023
EDITING PAD POSITION PARAMETERS
Use the parameters on the Position screen to control looping, start and end points,
playback direction, Clip synchronization and Slice selection. The tangerine establishes initial
values for sample position parameters by reading metadata embedded in each WAV file
that it loads, or if metadata does not include all required details, by applying default values.
Open the Pad Position Parameters Screen
In the Pad Macro screen, touch Pos.
The Pad Position Parameters screen opens. Not all position parameters are needed for all
Pad Modes, so the Pad Position Parameters screen only presents the parameters that apply
to the current Pad Mode.
The following screen shows the position parameters that appear when the Pad Mode is
Sample.
