Zte ZXR10 GER, Руководство пользователя

Страница: 43 / 412

Chapter 3 Structure and Principles
Confidential and Proprietary Information of ZTE CORPORATION 21
AUX port enables to monitor the equipment remotely. AUX port
is a DB9 male port (pin). Therefore, it needs to be matched with
the DB9 female port (interpolation). Table 12 shows AUX port
configuration.
T
A B L E
1 2 A
U X
P
O R T
C
O N F I G U R A T I O N S
SMP AUX Signal DB9-End Signal
1 T232DCD 7 RTS
2 T232RX 3 TX
3 T232TX 2 RX
4 T232DTR 6 DSR
5 GND 5 GND
6 T232DSR 4 DTR
7 T232RTS 1 DCD
8
Not
connected
8 Not connected
9 T232RI 9 RI
10/100/1000Base-T Ethernet interfaces are available on SMNP
front panel. This port is a management port connecting the
system to the background. This interface can serve as an out-
band router NM-port. The features of 10/100/1000Base-T
Ethernet interface are listed in Table 13.
T
A B L E
1 3 E
T H E R N E T
P
O R T
S
P E C I F I C A T I O N S
Port Type Specifications
100Base-T
In compliance with IEEE 802.3;
RJ45 connector
Category-3, 4 and 5 Unshielded Twisted Pairs (UTP)
Maximum transmission distance: 185m
100/1000Bas
e-T
In compliance with IEEE 802.3;
RJ45 connector
Category-5 Unshielded Twisted Pairs (UTP)
Maximum transmission distance: 100 m
Note: When the interface is connected with a host, straight-through
network cable is used; when it is connected with a hub, switch or
router, a crossover cable is used.
AUX Port
10/100/1000
Base-T
Ethernet
Interface