Zte ZXR10 GER, Руководство пользователя

Страница: 138 / 412

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
116 Confidential and Proprietary Information of ZTE CORPORATION
T
A B L E
1 4 1 E 1 C
H A N N L E
C
L O C K
S
O U R C E
Command
Format Command
Mode Command Function
vtg<Vtg
number>
e1< E1
number >
clock
source
Interface
config
This sets the clock source of E1
channel
Result: This sets the clock source of E1 channel.
5. To configure the network address of the CPOS interface, use
ip address command in interface configuration mode, as
shown in Table 142.
T
A B L E
1 4 2 I
P
A
D D R E S S
C
O M M A N D
Command
Format Command
Mode Command Function
ip address
Interface
configuration
This configures the network
address of the CPOS interface
Result: This configures the network address of the CPOS
interface.
6. To configure crc mode, use ip address command in
interface configuration mode, as shown in Table 143.
T
A B L E
1 4 3 I
P
A
D D R E S S
C
O M M A N D
Command
Format
Command
Mode
Command Function
ip address
Interface
config
This configures the crc mode
Result: This configures the crc mode.
E
ND OF STEPS
Example:
As shown in Figure 69, CP3 of a ZXR10 GER router is
interconnected with that of a remote ZXR10 GER router. It
adopts channelized configuration, 1-24 timeslots, layer-2 WAN
encapsulation protocol PPP, crc16 frame format and internal
clock mode.
F
I G U R E
6 9 E
X A M P L E O F
C
H A N N E L I Z E D
C P O S C
O N F I G U R A T I O N
ZXR10 ZXR10
cpos3_1/1.1/1/1:1
192.168.1.1/30
192.168.1.2/30
cpos3_1/1.1/1/1:1