Zte ZXR10 GER, Руководство пользователя

Страница: 367 / 412

Chapter 24 Multicast Routing Configuration
Confidential and Proprietary Information of ZTE CORPORATION 345
Command
Format
Command
Mode
Command Function
filter
Result: This limits the PIM-SM neighbors.
With the view of security, the PIM-SM limits some routers to
be neighbors at the interface.
Example: On the fei_1/1 interface, forbid the router
restricted by acl 10 to become the PIM neighbor.
Z X R 1 0 ( c o n f i g ) # a c c e s s - l i s t 1 0 d e n y 1 0 . 1 . 1 . 1
0 . 0 . 0 . 0
Z X R 1 0 ( c o n f i g ) # i n t e r f a c e f e i _ 1 / 1
Z X R 1 0 ( c o n f i g - i f ) # i p p i m n e i g h b o r - f i l t e r 1 0
Configuring MSDP
This topic describes how to configure MSDP.
Router Command Line Interface has been accessed
1. To enable the MSDP PEER to configure a MSDP neighbor, use
ip msdp peer <peer-address> connect-source <interface-
name> command in global configuration mode as shown in
Table 400.
T
A B L E
4 0 0 I
P
M
S D P
P
E E R
C
O M M A N D
Command
Format
Command
Mode
Command Function
ip pim
neighbor-
filter
Global
configuration
This enables the MSDP PEER to
configure a MSDP neighbor
Result: This enables the MSDP PEER to configure a MSDP
neighbor.
2. To enable the MSDP DEFAULT-PEER to define a default MSDP
neighbor, use ip msdp default-peer <peer-address> [list
<acl-number>] command in global configuration mode, as
shown in Table 401.
T
A B L E
4 0 1 I
P
M
S D P
D
E F A U L T
P
E E R
C
O M M A N D
Command
Format
Command
Mode
Command Function
ip pim
neighbor-
filter
Global
configuration
This enables the MSDP
DEFAULT-PEER to define a
default MSDP neighbor
Result: This enables the MSDP DEFAULT-PEER to define a
default MSDP neighbor.
Purpose
Prerequisite
Steps