Zte ZXR10 GER, Руководство пользователя

Страница: 197 / 412

Chapter 13 RIP Configuration
Confidential and Proprietary Information of ZTE CORPORATION 175
T
A B L E
2 1 1 T
I M E R S
C
O M M A N D
W
I N D O W
Command
Format Command Mode Command Function
timers basic
<update>
<invalid>
<holddown>
<flush>
RIP Config
This sets the timers for
good rip performance
<update> parameter range is from <1-65535> seconds.
This configures Rate in seconds at which update are sent.
This is the fundamental timing parameter of routing protocol.
<invalid> ranges from <1-65535> seconds. This configures
Interval of time (in seconds) after which a route is declared
invalid.
<holddown> ranges from <0-65535>. This is an Interval (in
seconds) during which routing information regarding better
paths is suppressed.
<flush> ranges from <1-65535>. This is an Amount of time
(in seconds) that must pass, before this route removes from
the routing table. This interval measures from last update
received for the route.
The basic timing parameters for RIP are adjustable. Since RIP is
executing a distributed, asynchronous routing algorithm, it is
important that these timers be the same for all routers and
access servers in the network.
Result: This configures RIP network timers for adjusting
parameters with other RIP neighbor.
2. To change the interpacket delay for RIP updates sent, use
the output-delay command in RIP configuration mode as
shown in Table 212. To remove the delay, use the no form of
this command.
T
A B L E
2 1 2 O
U T P U T
C
O M M A N D
W
I N D O W
Command
Format Command
Mode Command Function
output-
delay
<packets>
<delay>
RIP Config
This defines interpacket delay for
RIP updates
<packets> <delay> ranges from <1-4294967295>.
Consider using this command if there is a high-end router
sending at high speed to a low-speed router that might not
be able to receive at the high speed. Configuring this
command will help prevent the routing table from losing
information.
Result: This configures interpacket delay for RIPupdates.
Timing
Parameters