Zte ZXR10 GER, Руководство пользователя

Страница: 216 / 412

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
194 Confidential and Proprietary Information of ZTE CORPORATION
Result: This configures a router interconnecting to non-
broadcast networks.
E
ND OF STEPS
For additional information on OSPF additional configurations,
please refer to below procedures.
Configuring OSPF Authentication
This below procedure describes how to enable OSPF
authentication.
„
Router Command Line Interface has been accessed.
„
OSPF is running on a network as described in above basic
OSPF configuration.
1. To enable authentication in OSPF routing process, use area
<area-id> authentication [message-digest] command in
OSPF route mode as shown in Table 238.
T
A B L E
2 3 8 A
R E A
A
U T H E N T I C A T I O N
C
O M M A N D
Command
Format
Command
Mode
Command Function
area <area-id>
authentication
[message-digest]
OSPF Route
This enables authentication
in an OSPF area
Result: This enables authentication in the OSPF area.
2. For assigning password on OSPF interface used by
neighboring OSPF routers, use ip ospf authentication-key
<password> command in OSPF interface mode as shown in
Table 239.
T
A B L E
2 3 9 I
P
O
S P F
A
U T H E N T I C A T I O N
C
O M M A N D
Command
Format Command
Mode Command Function
ip ospf
authentication-
key < password>
OSPF
Interface
This configures password
for an interface of simple
password authentication
type
Result: This assigns a password to be used by neighboring
OSPF routers on a network segment that is using the OSPF
simple password authentication.
3. For enabling OSPF MD5 authentication on OSPF interface,
use ip ospf message-digest-key <keyid> md5
<password> [delay <time>] command in OSPF interface
mode as shown in Table 240.
Related
Information
Purpose
Prerequisites
Steps