Zte ZXR10 GER, Руководство пользователя

Страница: 134 / 412

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
112 Confidential and Proprietary Information of ZTE CORPORATION
2. To create a CPOS interface in T1 encapsulation, use format
tug-2 < Vtg number > t1 < T1 number > channel-group 1
timeslots < 1-24>. Command in interface configuration mode,
as shown in Table 129.
T
A B L E
1 2 9 T 1 E
N C A P S U L A T I O N S
C
P O S
I
N T E R F A C E
Command
Format
Command
Mode
Command Function
format tug-
2
< Vtg
number >
t1 < T1
number >
channel-
group 1
timeslots <
1-
24>.
Interface
config This creates a cpos interface in
the T1 encapsulation
Result: This creates a cpos interface in the T1 encapsulation.
3. To set the clock source of T1 channel, use tug-2<Vtg
number> t1< T1 number >clock source command in
interface configuration mode, as shown in Table 130.
T
A B L E
1 3 0 T 1 C
L O C K
S
O U R C E
C
O M M A N D
Command
Format Command
Mode Command Function
tug-2<Vtg
number>
t1< T1
number
>clock
source
Interface
config This sets the clock source of T1
channel
Result: This sets the clock source of T1 channel.
E
ND OF STEPS
E1 Encapsulation- AU-4
Refer to below procedure for configuring E1 encapsulation in
case of AU-4 on ZTE ZXR10 GER router.
Router Command Line Interface has been accessed.
1. To enter into the tug-3 configuration mode, use
au-4 1 tug-
3 command in interface configuration mode, as shown in
Table 131.
Purpose
Prerequisite
Steps