Zte ZXR10 GER, Руководство пользователя

Страница: 172 / 412

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
150 Confidential and Proprietary Information of ZTE CORPORATION
Result: This enables the BCP Bridge.
Note:
ppp bcp enable and ip forwarding-mode attributes are
provided only in the POS real interface. These two attributes
of the POS VLAN sub interface are the same as those of its
parent interface. In addition, the POS VLAN sub interface can
only be used for bridge and will be inactived if its parent
interface does not enable the BCP.
E
ND OF STEPS
Example :
As shown in Figure 78, R1 is connected with R2 through the
POS3 interface. R2 is connected with R3 through the 100M
interface. In the networking, R2 must be a transparent
transmission device. Througth BCP Encapsulation and Vlan-
Switch configurate, POS Vlan interface can communice to the
ethernet interface of R3 directly, and actived as a pair of
ethernet interfaces in a network.
F
I G U R E
7 8 P O S B
R I D G E
C
O N F I G U R A T I O N
E
X A M P L E
R1 R2
pos3_1/1.10
pos3_1/1
192.168.1.1/30
R3
fei_1/1.100
fei_1/1.100
192.168.1.2/30
R1 configuration:
Z X R 1 0 _ R 1 ( c o n f i g ) # i n t e r f a c e p o s 3 _ 1 / 1
Z X R 1 0 _ R 1 ( c o n f i g - i f ) # p p p b c p e n a b l e
Z X R 1 0 _ R 1 ( c o n f i g - i f ) # e x i t
Z X R 1 0 _ R 1 ( c o n f i g ) # i n t e r f a c e p o s 3 _ 1 / 1 . 1 0
Z X R 1 0 _ R 1 ( c o n f i g - s u b i f ) # e n c a p s u l a t i o n d o t 1 Q 1 0
Z X R 1 0 _ R 1 ( c o n f i g - s u b i f ) # i p a d d r e s s 1 9 2 . 1 6 8 . 1 . 1
2 5 5 . 2 5 5 . 2 5 5 . 2 5 2
R2 configuration:
Z X R 1 0 _ R 2 ( c o n f i g ) # i n t e r f a c e p o s 3 _ 1 / 1
Z X R 1 0 _ R 2 ( c o n f i g - i f ) # p p p b c p e n a b l e
Z X R 1 0 _ R 2 ( c o n f i g - i f ) # i p f o r w a r d i n g - m o d e m i x
Z X R 1 0 _ R 2 ( c o n f i g - i f ) # e x i t
Z X R 1 0 _ R 2 ( c o n f i g ) # i n t e r f a c e f e i _ 1 / 1
Z X R 1 0 _ R 2 ( c o n f i g - i f ) # i p f o r w a r d i n g - m o d e m i x
Z X R 1 0 _ R 2 ( c o n f i g - i f ) # e x i t
ZXR10_R2(config)#vlan-forwarding ingress pos3_1/1 10 egress
fei_1/1 1 0 0
R3 configuration:
Z X R 1 0 _ R 3 ( c o n f i g ) # i n t e r f a c e f e i _ 1 / 1 . 1 0 0
Z X R 1 0 _ R 3 ( c o n f i g - s u b i f ) # e n c a p s u l a t i o n d o t 1 Q 1 0 0
Z X R 1 0 _ R 3 ( c o n f i g - s u b i f ) # i p a d d r e s s 1 9 2 . 1 6 8 . 1 . 2
2 5 5 . 2 5 5 . 2 5 5 . 2 5 2