Zte ZXR10 GER, Руководство пользователя

Страница: 240 / 412

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
218 Confidential and Proprietary Information of ZTE CORPORATION
[metric-type < type-value> ] parameter defines external <Set
IS-IS external metric type> internal <Set IS-IS internal
metric type >.
Result: This configures default route information in IS-IS
routing table.
5. To summarize some entries in IS-IS routing table, use
command summary-address <ip-address> <net-mask>
<value> [level-1|level-1-2|level-2] in IS-IS config mode
as shown in Table 269.
T
A B L E
2 6 9 S
U M M A R Y
- A
D D R E S S
C
O M M A N D
Command Format
Command
Mode Command Function
summary-address
< ip-address > < net-
mask> < value>
[level-1|level-1-
2|level-2]
IS-IS
config
This defines an address
summary of IS-IS
This command generates a summary that advertise without
the need of detailed routing entries.
Metric value ranges from <0-4261412864>. The least
metric value among the aggregated routing entries
regard as the metric value of the summary route.
E
ND OF STEPS
For More information about IS-IS configuration please follow the
below procedures.
IS-IS Interface Parameters
This below procedure delivers the information about IS-IS
interface configuration parameters.
„
Router Command Line Interface has been accessed.
„
IS-IS is running in a network.
1. Use command isis circuit-type {level-1|level-1-2|level-
2-only} in IS-IS interface config mode for defining operation
type of an IS-IS interface as shown in Table 270.
T
A B L E
2 7 0 I
N T E R F A C E
- L
E V E L
C
O M M A N D
Command Format
Command
Mode
Command Function
isis circuit-type
{level-1|level-1-
2|level-2-only}
IS-IS
interface
config
This defines the type of
adjacency on an the
interface
Related
Information
Purpose
Prerequisites
Steps