Zte ZXR10 GER, Руководство пользователя

Страница: 305 / 412

Chapter 19 MPLS Configuration
Confidential and Proprietary Information of ZTE CORPORATION 283
ZXR10 #show mpls interface
interface of LDP:
Interface IP Tunnel Operational
fei_1/5 Yes(ldp) No Yes
fei_1/6 Yes(ldp) No Yes
ZXR10#
2. To check MPLS LDP parameters, that is, LDP timer
parameters use show mpls ldp parameters command in
privileged mode as shown in Table 330.
T
A B L E
3 3 0 S
H O W
M
P L S
L
D P
P
A R A M E T E R S
C
O M M A N D
Command
Format
Command
Mode
Command Function
show mpls ldp
parameters
Privileged
This check the current
parameter information about
LDP
Result: This check the current parameter information about
LDP.
ZXR10 #show mpls ldp parameters
Protocol version: 1
Downstream label pool: min label: 16; max label:
1048575
Session hold time: 180 sec; keep alive interval: 60 sec
Discovery hello: holdtime: 15 sec; interval: 5 sec
Downstream on Demand max hop count: 255
LDP initial/maximum backoff: 15/120 sec
LDP loop detection: off
ZXR10#
3. To display LDP discovery information, use show mpls ldp
discovery [detail] command in privileged mode as shown in
Table 331.
T
A B L E
3 3 1 S
H O W
M
P L S
L
D P
D
I S C O V E R Y
C
O M M A N D
Command
Format
Command
Mode
Command Function
show mpls ldp
discovery
[detail]
Privileged
This displays LDP discovery
information
Result: This displays LDP discovery information.