Zte ZXR10 GER, Руководство пользователя

Страница: 135 / 412

Chapter 6 Interface Configuration
Confidential and Proprietary Information of ZTE CORPORATION 113
T
A B L E
1 3 1 T
U G
- 3 C
O N F I G
M
O D E
Command
Format Command
Mode Command Function
au-4 1 tug-
3 Interface
config This enables to enter into the
tug-3 configuration mode
Result: This enables to enter into the tug-3 configuration
mode.
2. To set the framing format of E1 channel, use tug-2<Vtg
number > e1< E1 number > framing command in interface
configuration mode, as shown in Table 132.
T
A B L E
1 3 2 E 1 F
R A M I N G
F
O R M A T
Command
Format
Command
Mode
Command Function
tug-2<Vtg
number >
e1< E1
number >
framing
Interface
config
This sets the framing format of
E1 channel
Result: This sets the framing format of E1 channel.
3. To create a CPOS interface in the E1 encapsulation format,
use tug-2<Vtg number> e1< E1 number > channel-group
1 timeslots <1-31> command in interface configuration
mode, as shown in Table 133.
T
A B L E
1 3 3 E 1 C
P O S
I
N T E R F A C E
Command
Format
Command
Mode
Command Function
tug-2<Vtg
number>
e1< E1
number >
channel-
group 1
timeslots
<1-31>
Interface
config
This creates a CPOS interface in
the E1 encapsulation format
Result: This creates a CPOS interface in the E1
encapsulation format.
4. To set the clock source of E1 channel, use tug-2<Vtg
number> e1< E1 number > clock source command in
interface configuration mode, as shown in Table 134.
T
A B L E
1 3 4 E 1 C
L O C K
S
O U R C E
Command
Format
Command
Mode
Command Function
tug-2<Vtg
number>
Interface
config
This sets the clock source of E1
channel