Zte ZXR10 GER, Руководство пользователя

Страница: 198 / 412

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
176 Confidential and Proprietary Information of ZTE CORPORATION
3. To define a neighboring router with which to exchange
routing information, use neighbor command in RIP
configuration mode as shown in Table 213 . To remove an
entry, use the no form of this command.
T
A B L E
2 1 3 N
E I G H B O R
C
O M M A N D
W
I N D O W
Command
Format
Command
Mode
Command Function
neighbor < ip-
address>
RIP Config This defines neighboring
router with which routing
information is exchanged
< ip-address> refers to IP address of a peer router with
which routing information exchanges.
This command permits the point-to-point (non-broadcast)
exchange of routing information, when use with combination
of passive-interface router configuration command, routing
information exchanges between a subset of routers and
access servers on a LAN.
Result: This configures a peer router with whom routing
information exchanges.
4. To enable authentication for RIP Version 2 packets and to
specify set of keys that uses on an interface, use ip rip
authentication key command in RIP interface configuration
mode as shown in Table 214 . Use the no form of this
command to prevent authentication.
T
A B L E
2 1 4 I
P
R
I P
A
U T H E N T I C A T I O N
K
E Y
Command
Format
Command
Mode
Command Function
ip rip
authentication
key <key>
RIP Interface
Config
This designates a key that
can be used for simple text
authentication of an
interface
<key> refers to authentication key in characters ranges
from <1- 16>.
This command specifies, to accept only those RIP update
packets coming from the peer that is authenticated.
Result: This configures authentication for RIP routing
updates.
5. To specify the type of authentication used in RIP Version 2
packets, use ip rip authentication mode command in RIP
interface configuration mode as shown in below table. Use
the no form of this command to restore clear text
authentication.