Zte ZXR10 GER, Руководство пользователя

Страница: 236 / 412

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
214 Confidential and Proprietary Information of ZTE CORPORATION
1. Enter into configuration mode by writing config terminal
command in global configuration mode as shown in Table
260.
T
A B L E
2 6 0 C
O N F I G
T
E R M I N A L
C
O M M A N D
Command
Format
Command
Mode
Command Function
config
terminal
Exec Enters into global configuration
mode
Result: This enables to enter into global configuration mode.
2. To enable IS-IS, use router isis command in global config
mode as shown in Table 261.
T
A B L E
2 6 1 I
S
- I
S
C
O M M A N D
W
I N D O W
Command
Format
Command
Mode
Command Function
router isis global config This establish isis routing process
Result: This enables IS-IS routing process.
3. For defining an IS-IS area use area <area-string>
command in IS-IS config mode as shown in Table 262.
<area-string > refers to format e.g. 1111.1111.1111.
T
A B L E
2 6 2 A
R E A
C
O M M A N D
W
I N D O W
Command
Format
Command
Mode
Command Function
area <string> IS-IS config identify an area to which IS-IS
instance is assigned
Result: This enables an area to which router interface
belongs.
4. To designate router for specific area, use system-id
<system-id> [range <range- number>] command in IS-IS
config mode as shown in Table 263.
<system-id> normally expressed a unique ID of an
interface of router. [range <range- number>] parameter
is 1-32.
T
A B L E
2 6 3 S
Y S T E M
I
D
C
O M M A N D
W
I N D O W
Command Format
Command
Mode
Command Function
system-id
<system-id> [range
<range- number>]
IS-IS config
This identify router in an
area
Result: This configures system - id of the IS-IS
Steps