Zte ZXR10 GER, Руководство пользователя

Страница: 335 / 412

Chapter 22 VPLS Configuration
Confidential and Proprietary Information of ZTE CORPORATION 313
1. To create VFI, use command vfi <vfi-name> in global
configuration mode. This is shown in Table 355.
T
A B L E
3 5 5 V
F I
C
O M M A N D
Command
Format Command
Mode
Command Function
vfi <vfi-
name>
global config This creates VFI
Result: This creates VFI.
2. To enable MPLS, use command mpls ip in global
configuration mode. This is shown in Table 356.
T
A B L E
3 5 6 M
P L S
I
D
C
O M M A N D
Command
Format
Command
Mode
Command Function
mpls ip global config This enables MPLS
Result: This enables MPLS.
3. To create VCID, use command vcid <vcid-number> in VFI
configuration mode. This is shown in Table 357.
T
A B L E
3 5 7 V
C I D
C
O M M A N D
Command
Format
Command
Mode
Command Function
vcid
<vcid-
number>
VFI This creates VCID
Result: This creates VCID.
4. To configure PWTYPE, use command pwtype
<ethernet|ethernet-vlan> in VFI configuration mode. This is
shown in Table 358.
T
A B L E
3 5 8 P
W T Y P E
C
O M M A N D
Command Format Command
Mode
Command Function
pwtype
<ethernet|ethernet-
vlan>
VFI This configures PWTYPE
Result: This configures PWTYPE.
5. To create peer, use command peer {<peer-router-id>
＜
-
1024
＞
| spoke
＜
1-1024}
＞
in VFI configuration mode. This
is shown in Table 359.