Zte ZXR10 GER, Руководство пользователя

Страница: 214 / 412

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
192 Confidential and Proprietary Information of ZTE CORPORATION
Result: This specifies the number of seconds between
link-state advertisement (LSA) retransmissions for
adjacencies belonging to an OSPF interface.
3. For sending LSA update packet to on an OSPF interface, use
ip ospf transmit-delay <seconds> command in OSPF
interface mode as shown in Table 234.
T
A B L E
2 3 4 I
P
O
S P F
T
R A N S M I T
D
E L A Y
Command
Format
Command
Mode
Command Function
ip ospf
transmit-delay
< seconds>
OSPF
Interface
This designates delay for
an interface to transmit a
link state update packet
Result: This sets estimated number of seconds required to
send a link-state update packet on an OSPF interface.
4. For OSPF designated router in a network, use ip ospf
priority <seconds> command in OSPF interface mode as
shown in Table 235.
T
A B L E
2 3 5 I
P
O
S P F
P
R I O R I T Y
Command
Format Command
Mode Command Function
ip ospf priority
< number>
OSPF Interface
This configures interface
priority
Result: This sets priority to help determine the OSPF
designated router for a network.
5. For OSPF device that must wait for hello packet of other
router, use ip ospf dead-interval <seconds> command in
interface mode as shown in Table 236.
T
A B L E
2 3 6 I
P
O
S P F
D
E A D
- I
N T E R V A L
C
O M M A N D
Command
Format
Command
Mode
Command Function
ip ospf dead-
interval
< seconds>
OSPF
Interface
This designates the dead
interval of the neighbor on an
interface
Result: This sets the number of seconds that a device must
wait before it declares a neighbor OSPF router down because
this has not received a hello packet.
E
ND OF STEPS
Example: As shown in Figure 87, OSPF runs on routers R1 and
R2, and network is divided into three areas.