Zeiss MMZ M, Руководство по эксплуатации

Страница: 30 / 154

Safe operation of the CMM
2-12
61211-1270302 MMZ M
– Do not make any alterations to the CMM.
Maintenance work
Any modification and maintenance work on the CMM may only be car-
ried out by ZEISS service engineers or trained personnel authorized by
ZEISS.
Sufficient illumination
Sufficient illumination is required for safe operation of the CMM.
– Ensure sufficient illumination before starting the CMM.
Visual check
A visual check must be carried out before switching the CMM on. The
CMM may be switched on only if it is in perfect condition.
– Make sure that the CMM is in perfect condition.
Work on the CMM
Make sure that no travel movements are possible when working on the
CMM.
– Switch the drives off before proceeding with the following work:
– Preparing the workpiece and the probing system
– Care and cleaning
Protective circuit
The function of the protective circuit must be checked regularly during
measurement operation in order to guarantee safe operation of the
CMM.
– Check the function of the protective circuit every 3 months.
If the protective circuit is not functioning properly, the CMM must be
taken out of operation until the protective circuit has been checked
by a ZEISS service engineer.
Protection of the eyes
Styli can hurt the eyes during travel movements if you approach your
head close to the workpiece during probing.
– Keep a safe distance away from the styli.
– Wear safety goggles.