Zeiss MMZ M, Руководство по эксплуатации

Страница: 128 / 154

Maintenance
9-2
61211-1270302 MMZ M
Maintenance
Purpose of maintenance work
Maintenance work serves the following purposes:
– Safety during the measuring run
– Avoiding downtimes
– Measuring with the highest precision.
In order to guarantee these features in the long run, the CMM requires
regular maintenance.
NOTE
Maintenance work must be carried out only by competent specialists.
These persons must have received special training on the corresponding
CMM qualifying them to carry out all necessary maintenance work.
Maintenance agreement
ZEISS offers maintenance agreements relieving you of any need to worry
about maintenance.
NOTE
If you wish to subsequently conclude a maintenance agreement, call
our support.
➤
See [
⇨
8-8]
Regarding maintenance work, a distinction is made between Extensive
maintenance and Little maintenance .
Extensive maintenance:
– Performance of preventive maintenance actions on all components
according to manufacturer specifications.
– Acquisition and correction of the geometry with laser and other
measuring machines.
– Visual check of the data system.
– Test of the drives and motors in all axes.
– Calibration and recording of measuring results.
– Replacement of possible wear ana spare parts against invoice.
The scope includes the check of a combination of the probe and mea-
suring software, for example VAST/CALYPSO. Further combinations
will be billed separately on a T & M basis.