Zeiss MMZ M, Руководство по эксплуатации

Страница: 57 / 154

Control and operation
61211-1270302 MMZ M
3-13
Control element Function
EMERGENCY STOP button The push-and-turn button can be
pressed to stop all travel movements in
cases of emergency. It engages when
pressed. All drives are switched off.
The
EMERGENCY STOP button must be
released before reactivating the drives.
Release the button by turning it clock-
wise. After that, the drives can be
switched on again. For further informa-
tion
➤
See [
⇨
2-14]
Push button for clearing A limit switch is activated when the
CMM moves to the end position. The
drives are switched off. The
push but-
ton is used to move the CMM back to
into the measuring range.
Control elements for collision protection of the ram
1 Indicator lamp for collision protection
2 Indicator lamp for bypassing the collision protection
3 Acoustic signal for bypassing the collising protection.
4 Key-operated switch for collision protection functions
Functions assigned to the switch positions:
start: Activation of the collision protection.
The
key-operated switch does not remain in this po-
sition, but returns to the «active» position.
active: Normal operating position.
A pilot lamp signals that the collision protection is
active.