Zeiss MMZ M, Руководство по эксплуатации

Страница: 20 / 154

Intended use
2-2
61211-1270302 MMZ M
Intended use
Warranty
The coordinate measuring machine (CMM) may be used only for its in-
tended purpose. The operator is liable for any damage incurred during
any reasonably foreseeable misuse.
CMM
The CMM can be used to determine the geometric sizes of workpieces.
The workpieces may be made of metal or plastic. Geometric sizes are
width, length, height as well as the diameter and depth of bores, for ex-
ample. The position of bores is calculated from the measuring data. Fur-
thermore, the form of workpieces can be determined by means of a spe-
cial software.
NOTE
The CMM may be used only for determining geometric parameters of
workpieces. The CMM must not be used for any purposes other than
those listed below.
Only workpieces and objects required for measurement may be placed
on the measuring plate.
Functions of the CMM:
– Workpiece probing in six directions (±X, ±Y, ±Z).
The CMM can be moved in the axes X, Y and Z. Probing is per-
formed by means of a probing system. For measurement, the work-
pieces must be fastened on measuring plate or devices.
– The measuring plate and devices have the following functions:
– Holding and securing one or more workpieces
– Holding and securing qualification tools
– Holding and securing a changer rack (optional)
– Holding and securing a rotary table (optional)
– Fastening of the workpieces, installation of changer racks, quali-
fication tools and rotary table by use of the threaded holes pro-
vided in the measuring plate.
– Moving workpieces by means of the rotary table.