Special measures
8-6
61211-1270302
MMZ M
Collision of the ram or the support column
NOTE
If the ram or the probe collides with an obstacle, the guideway and
other components of the CMM may become damaged. In this case,
perfect measuring operation is no longer guaranteed.
If the ram or the support column runs into an obstacle, the drives
switch off. After a collision, proceed as follows:
1
First of all, check if a probing action was registered due to the colli-
sion with the ram.
If a probing is indicated on the control console, this condition must
first be deleted by moving the corresponding joystick.
start
active
bypass
2
Deactivate the collision protection by turning the key-operated
switch to the «bypass» position.
The indicator lamp for the deactivated collision protection is lit. In
addition, a signal tone is heard.
3
Reactivate the drives.
If the drives cannot be switched on, the CMM must be reinitialized.
For more information about the initialization procedure, please refer
to the operating instructions for the measuring software.
4
Clear the CMM by means of the joystick.
5
Activate the collision protection.
start
active
bypass
Turn the key-operated switch to «start» and hold until the corre-
sponding indicator lamp lights up.
The drives switch off.
6
Reactivate the drives.
7
Restore the computer's normal state.
Finish the automatic measuring run.
An automatic measuring run may not be carried out after a collision
because it could result in another collision.
Collision during automatic stylus system change
A collision occurring during change may be caused by missing intermedi-
ate positions.
Содержание MMZ M
