YOKOGAWA TA720 Скачать руководство пользователя страница 173

Страница: 173 / 228

12-3

IM 704510-01E

Ethernet Communications (Option)

Setting the DNS

11.

Turn the rotary knob to move the cursor to DNS.

12.

Press SELECT to display the DNS setting menu.

13.

Press the SELECT key to select ON, OFF, or AUTO (AUTO can be specified only

when DHCP is ON). When DNS is set to AUTO, the domain name and DNS

server name are automatically configured by power-cycling the TA720.

If DNS is set to ON, the domain name, DNS server name, and domain suffix are

displayed.

If DNS is set to OFF, check the network cable connection and power cycle the

TA720.

14.

Turn the rotary knob to move the cursor to Domain Name.

15.

Press the SELECT key to display the keyboard.

16.

Enter the domain name using the keyboard.

For the procedure to enter the character string, see section 4.4.

17.

Turn the rotary knob to the desired digit of DNS Server1 and press the SELECT

key to display the value entry area.

18.

Use the rotary knob to set the IP address of the primary DNS server.

19.

Likewise, set the IP address of the secondary DNS server in DNS Server2.

20.

Turn the rotary knob to move the cursor to Domain Suffix1.

21.

Press the SELECT key to display the keyboard.

22.

Enter the primary domain suffix using the keyboard.

23.

Likewise, set the secondary domain suffix in Domain Suffix2.

Turning ON/OFF the Power

24.

To apply the new settings, the TA720 must be power cycled. After all the settings

are complete, turn the power to the TA720 OFF, then back ON again.

Explanation

To use the Ethernet communication functions of the TA720, the following settings are

required.

Setting the IP Address, Subnet Mask, Default Gateway, DHCP, and DNS

Consult your system or network administrator in setting these parameters.

• DHCP (Dynamic Host Configuration Protocol)

If DHCP is enabled, the following items are automatically configured.

IP Address, Subnet Mask, Default Gateway, and DNS settings

To use DHCP, the network must have a DHCP server.

Consult your network administrator to see if DHCP can be used.

If DHCP is used, a different IP address may be assigned to the TA720 each time the

power is turned ON. Therefore, you must be careful when using the FTP server

function of the TA720.

• IP Address (Internet Protocol Address)

Set the IP address to assign to the TA720. The default setting is [0.0.0.0].

The IP address is used to uniquely identify a device on the Internet when using TCP/

IP. The address is a 32-bit value expressed in four octets (each 0 to 255), each

separated by a period as in [192.168.111.24]. A unique ID must be acquired from the

network administrator.

If DHCP can be used, the IP address is automatically assigned.

12.2 Setting the TCP/IP

Содержание TA720





































































































































































































































Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды

YOKOGAWA TA720, Руководство пользователя

Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды