YOKOGAWA TA720 Скачать руководство пользователя страница 161

Страница: 161 / 228

11-23

IM 704510-01E

Saving/Recalling Data and Outputting Screen Images

Change the file name using the keyboard.

Change the file name according to the procedure given in section 4.4.

Press the Enter key on the keyboard to apply the new name.

Explanation

Specifying the Files to Be Listed (Filter)

The type of files to be listed can be specified.

• *.XXX: Displays only the files with the type of data (Setup, Measure, or Statistics)

specified by File Item in the File menu.

• *.*:

Displays all the files in the storage medium.

Changing the File Name or Directory Name

Change the file name and directory name using up to 25 characters including the

extension. However, files and directories on the network drive (optional function) cannot

be renamed. In addition, if the number of characters excluding the extension exceeds 8

characters on the file list displayed on the TA720, only the first 7 characters and

extension are displayed as in TA72000>.SET (only the first 7 characters for directories).

Do not change the extension of files used on the TA720. If you do, the files will no

longer be usable on the TA720.

Note

•

Files cannot be renamed while measurement is in progress (while the START/STOP indicator

is illuminated).

•

When Filter is set to *.WVF and you rename a measured result data file (a file with .wvf

extension), the corresponding header file (a file with .hdr extension) is also renamed.

•

Characters exceeding 7 characters are displayed as >. To check the characters exceeding 7

characters, select Property to display all the characters.

11.9 Renaming Files and Directories

Содержание TA720





































































































































































































































Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды

YOKOGAWA TA720, Руководство пользователя

Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды