11-25
IM 704510-01E
Saving/Recalling Data and Outputting Screen Images
3
2
1
4
5
6
7
8
9
10
11
11
12
13
14
15
Creating the Directory
7.
Press the Dir Name soft key to display a keyboard screen.
Enter the directory name according to the procedure given in section 4.4.
Press the Enter key to create the directory.
Explanation
Creating Directories
A new directory can be created on the floppy disk, PC card, or network drive. Note the
following points when creating a directory.
• Enter the directory name using up to 8 characters.
• A directory created on a network drive cannot be renamed from the TA720. Deleting
the directory is possible.
• When renaming a directory on a floppy disk or PC card (see section 11.9), up to 25
characters can be used. However, if the number of characters exceed 7 characters,
the characters exceeding 7 characters are displayed as > as in <TA72000>>. The file
name can be confirmed using properties.
• If a directory with a same name already exists in the same directory, the directory
cannot be created.
Note
Directories cannot be created while measurement is in progress (while the START/STOP
indicator is illuminated).
11.10 Creating Directories
