YOKOGAWA TA720 Скачать руководство пользователя страница 159

Страница: 159 / 228

11-21

IM 704510-01E

Saving/Recalling Data and Outputting Screen Images

Selecting the Copy Source Files

Turn the rotary knob to select the copy source file and press the SET/RESET soft

key.

An asterisk appears to the left of the file name. Press the Set/Reset soft key again

to remove the asterisk.

To copy all the files that are displayed, press the All Set soft key. Press the All

Reset soft key again to reset the selection. The asterisk marks disappear.

Setting the Copy Destination Directory

Press the Dest Dir soft key.

A File List used to set the copy destination directory appears.

Turn the rotary knob to select the storage medium (indicated with ) and press the

SELECT key.

10.

Likewise, select the copy destination directory (indicated with < >).

[Path=......] shows the selected storage medium/directory.

Executing the Copy Operation

11.

Press the Copy Exec soft key.

All files with asterisks are copied.

CAUTION

Do not remove the storage medium or turn OFF the power while files are being

copied (while

is blinking). Such acts can damage the storage medium or

destroy the data on the storage medium.

Explanation

Specifying the Files to Be Listed (Filter)

The type of files to be listed can be specified.

• *.XXX: Displays only the files with the type of data (Setup, Measure, or Statistics)

specified by File Item in the File menu.

• *.*:

Displays all the files in the storage medium.

Note

•

Files cannot be copied while measurement is in progress (while the START/STOP indicator is

illuminated).

•

If an error occurs while copying multiple files, the files after the error occurrence are not

copied.

•

You cannot copy files if files with the same file name exist at the copy destination.

•

You cannot copy the same files to another directory after copying the files. Select the files to

be copied again and copy them.

•

When Filter is set to *.WVF and you copy measured result data files (files with .wvf

extension), the corresponding header files (files with .hdr extension) are also copied.

11.8 Copying Files

Содержание TA720





































































































































































































































Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды

YOKOGAWA TA720, Руководство пользователя

Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды