YOKOGAWA TA720 Скачать руководство пользователя страница 139

Страница: 139 / 228

11-1

IM 704510-01E

Saving/Recalling Data and Outputting Screen Images

Chapter 11 Saving/Recalling Data and Outputting Screen Images

11.1 Using the Floppy Disk

Setup parameters, measured results, statistical calculation results, and screen images

can be saved to the floppy disk. On models with the optional “Ethernet int PC

card drive (/C10 option),” data saved to the floppy disk can be accessed from a PC via

the Ethernet network.

Floppy Disks That Can Be Used

The following types of 3.5" floppy disks can be used. Formatting is also possible on the

TA720.

• 2HD: Formatted to 1.44 MB using MS-DOS.

• 2DD: Formatted to 720 KB using MS-DOS.

Inserting the Floppy Disk into the Floppy Disk Drive

With the label facing left, insert the disk into the floppy disk drive. Insert the disk until the

eject button pops out.

Removing the Disk from the Floppy Disk Drive

Check that the access indicator is not illuminated and press the eject button.

Eject button

Access indicator

CAUTION

Removing the floppy disk while the access indicator is blinking can damage the

magnetic head of the floppy disk drive or destroy the data on the floppy disk.

General Handling Precautions of Floppy Disks

For the general handling precautions of the floppy disk, read the instruction manual that

came with the floppy disk.

Содержание TA720





































































































































































































































Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды

YOKOGAWA TA720, Руководство пользователя

Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды