YOKOGAWA TA720 Скачать руководство пользователя страница 157

Страница: 157 / 228

11-19

IM 704510-01E

Saving/Recalling Data and Outputting Screen Images

Changing the File Attribute (Attr)

The following attribute on a file saved to a floppy disk or PC card can be changed one

file at a time. You cannot change a directory attribute. If you set the attribute to R, the

file cannot be deleted. Set the attribute to R for files you do not wish to delete.

• R/W: Read and write (default setting).

• R:

Read only.

Selecting the Files or Directories to Be Deleted

Press the Set/Reset or All Set soft key to place asterisks to the left of the file names and

directory names shown in the file list. Files with asterisks will be deleted.

Properties

Lists the file size, saved date/time, attribute, and comment of the selected file.

Note

•

Files cannot be deleted while measurement is in progress (while the START/STOP indicator

is illuminated).

•

Data that is deleted cannot be recovered. Make sure you erase the correct files.

•

You can not delete directories if there are files in them.

•

If an error occurs while deleting multiple files, the files after the error occurrence are not

deleted.

11.7 Deleting Files and Directories

Содержание TA720





































































































































































































































Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды

YOKOGAWA TA720, Руководство пользователя

Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды