YOKOGAWA TA720 Скачать руководство пользователя страница 118

Страница: 118 / 228

8-13

IM 704510-01E

Detailed Display Setup

Marker Type

• X Marker (X1, X2): On the histogram display, the measured value and frequency at

the X-axis coordinate of markers X1 and X2 are displayed. On

the time variation display, the time stamp and measured value are

displayed.

• Y Marker:

Markers used to set the area for performing the statistical

calculation. The markers are valid when the statistical calculation

area is set to Marker. On the time variation display, two Y

markers, Y1 and Y2, are displayed.

Movement Range of the X1 Marker

Left of the X2 marker within the window (including the position of the X2 marker).

Movement Range of the X2 Marker

Right of the X1 marker within the window (including the position of the X1 marker).

Selecting the Movement Speed of Markers

Moves 1 dot at a time in the window.

: Moves 5 dots at a time in the window.

Selectable Range of the Y Marker (for Histogram Display)

0 to 1000000000 (1e9)

Movement Range of the Y1 Marker (for time variation display)

Below the Y2 marker within the window (including the position of the Y2 marker).

Movement Range of the Y2 Marker (for time variation display)

Above the Y1 marker within the window (including the position of the Y1 marker).

Note

•

When measurement is performed on the auto window, the specified positions are

invalidated, and the marker positions are automatically set.

•

If there are multiple data points at the marker position in the time variation display, the

average value is displayed.

•

If there is no data at the marker position in the time variation display, an asterisk (*) is

displayed.

•

If the Y marker value is greater than the Y-axis maximum (Y High) in histogram display,

the Y-marker is not displayed.

8.5 Reading Measured Results Using Markers

Содержание TA720





































































































































































































































Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды

YOKOGAWA TA720, Руководство пользователя

Результаты поиска

Содержание TA720

Отзывы:

Похожие инструкции для TA720

Бренды по названию

Популярные бренды