6-48
IM AQ1300-01EN
Burst Setting
These settings are valid when the traffic format is “Burst.”
Burst Number
Specify the number of burst frames.
Range: 1 to 65535
Interval
Set the interval.
1 to 1000000 us, 1 to 1000 ms
Unit Setting
Set the unit of the interval.
us, ms
Tx Mode Setting Screen
Tx Mode
Set the Tx mode.
• Continuous: In this mode, frames are transmitted continuously. After you start transmission, it
continues until you stop it.
• Frames:
In this mode, a specified number of frames is transmitted. After you start
transmission, the specified number of frames is sent, and then transmission is
stopped automatically.
• Time:
In this mode, frames are transmitted for a specified period of time. After you start
transmission, it continues for the specified period of time and is then stopped
automatically.
Frames
When Tx Mode is set to Frames, set the number of frames.
Range: 1 to 4,294,967,295
Tx Time
When Tx Mode is set to Time, set the Tx time.
Range: 1 to 86400 s
BERT Rx Screen
Oversize Threshold
Set the threshold for determining oversize frames.
Range: 65 to 10000 bytes
Include Error frames in BER Test
Select whether or not to include error frames in the BERT.
• Selected: Error frames are included in the BERT.
• Cleared: Error frames are not included in the BERT.
Timeout Period for Syncloss
Specify the timeout period for determining sync loss.
• None: No timeout period is set.
• 2s: A timeout period of 2 s is set.
6.9 Configuring a BERT
