13-6
IM AQ1300-01EN
• One-way(M->S)
Test is executed in the master-to-slave direction.
• One-way(S->M)
Test is executed in the slave-to-master direction.
• Two-way
Test is executed in the master-to-slave direction and slave-to-master directions.
• Asymmetric Test
Different services can be set on the master device and slave device. The frame length and Tx
rate can be set to different values to perform tests on different traffic conditions in the master-
to-slave and slave-to-master directions. Use this option when the uplink and downlink speeds
of the network segment are different. When Asymmetric Test is unselected, the service setting
of the slave device is set the same as the master device.
13.3 Setting Up a Test
