6-17
IM AQ1300-01EN
Manual T
est Settings (Manual)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
Tx Mode Setting Screen
Press the
Detail Setup
soft key and then the
Tx Mode Setting
soft key to display the following screen.
Set the Tx mode
(Continuous, Frames, Time).
Set the time (1-86400 s).
This setting appears when Tx Mode is set
to Time.
Set the number of frames
(1-4294967295).
This setting appears when Tx Mode is set
to Frames.
Rx Setting Screen
Press the
Detail Setup
soft key and then the
Rx Setting
soft key to display the following screen.
Set the oversize threshold
(65-10,000 bytes).
Select this check box to detect payload
errors.
Set the offset (Match to Tx Setting,
Manual).
Set the offset byte (byte 0-255).
This setting is valid when offset is set to
Manual.
Set the frames to take statistics of
(Test Frame Only, All Frames).
Configure the frame settings.
Frame structure indication
Set the Rx base filter methods.
Configure the Rx base filter.
Select a check box to use the
corresponding Rx base filter.
Set how Rx base filters 1 and 2 are
combined (AND, OR).
Set the frame pass condition
(Match, Mismatch).
6.5 Configuring a Traffic Test
