6-45
IM AQ1300-01EN
Manual T
est Settings (Manual)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
6.9 Configuring a BERT
Procedure
BERT Setup Screen
Follow the procedure in section 6.4 to display the BERT Setup screen.
Tx Setting Screen
Press the
Detail Setup
soft key and then the
Tx Setting
soft key to display the following screen.
Select this check box to adjust the
frame length.
Configure frame length adjustment.
►
section 6.5
Configure the frames.
►
section 6.5
Frame structure indication
Set the frame length (48-9999 bytes).
Actual frame length indication
Contents
Tx Rate Screen
Press the
Detail Setup
soft key and then the
Tx Rate
soft key to display the following screen.
Set the traffic format
(Constant, Burst).
Select this check box to send frames at
rates that exceed 100% of the Tx rate
(when this check box is selected, the Tx
rate can only be set in bits).
Set the Tx rate
(when Frame Length is set to 64 bytes and
Test Interface is set to XFP).
( Percentage range: 0.00001-100.00000
Bit range: 72-9999999424
fps range: 1.00000-14880952.38095 fps).
Set the unit (%, bit, fps).
Set the burst number (1-65535).
Set the interval
(1-1000000 us, 1-1000 ms).
Set the unit (us, ms).
These settings are valid when the traffic
format is “Burst.”
