7-7
IM AQ1300-01EN
Measuring
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
Displaying Test Results in Auto or Auto(Remote) Mode When the
Test Item Execution Type Is Continue
During continuous test item execution, results of tests that have been completed can be displayed.
1.
Follow the procedure in section 4.4 to set the test items to execute.
2.
Follow the procedure in section 4.11 to set the test item execution type to Continue.
3.
Start measurement. The following screen appears.
Test Result Page (Page 1)
Test items to execute (list)
Test result display page
Page 1 displays a list of test items.
Page 2 and subsequent pages display the
test results of the test items.
In the left example, five test items are
displayed.
The first test, traffic test, is complete, and
the test result is “Pass.”
The second test, loopback test, is in
progress.
The number of the test item being
executed
In this example, number 2, which indicates
the loopback test, is displayed.
Use the
up and down arrow keys
to change the displayed test result page.
Test result pages are in the same order as the test items in the list.
Test Result Page (Page 2 and later)
The number of the displayed test result
In this example, number 1 , which indicates
the traffic test, is displayed.
The number blinks if the test item is being
executed.
Test results
This example shows the test results of the traffic test.
Pass/fail indication (Pass, Fail)
This does not appear when the test item is
being executed.
Note
A list of test items is always displayed on the first page.
7.1 Starting and Stopping Measurement
