7-11
IM AQ1300-01EN
Measuring
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
7.4 Inserting
Errors
Procedure
Follow the procedure in section 7.1 to start measurement and transmission for a traffic, QoS, or BER
test.
Press the
Special Control
soft key and then the
Error Insertion
soft key to display the following
screen.
Example When a BERT Is Being Performed
Inserts a bit error
Valid when the test mode is BERT
Inserts a payload error
Inserts a CRC error
Inserts a symbol error
Inserts a sequence error
Explanation
Bit Error
A single bit error is inserted. This soft key is valid during a BER test.
CRC Error
A single frame is inserted with a CRC error. This setting is valid when you are performing a traffic,
QoS, or BER test.
Symbol Error
A single frame is inserted with a symbol error. This setting is valid when you are performing a traffic,
QoS, or BER test.
Sequence Error
A single frame is inserted with a sequence error. This setting is valid when you are performing a
traffic, QoS, or BER test.
Payload Error
A single frame is inserted with a payload error. This setting is valid when you are performing a
traffic, QoS, or BER test.
Note
When Manual has been selected in the Test menu, if you select the “Remove Test Tag from Test Frame”
check box in the Option (Manual) Advance setup, sequence errors and payload errors are not inserted.
