Yamatake HGC303, Руководство пользователя

Страница: 89 / 130

Yamatake Corporation Operation
Model HGC303 - Heat Value Gas Chromatograph 3-47
3-4-4 : Description of component data table
Select [Component data table] from the calibration setting panel, the following screen
will appear.
Figure 3-16 Component data table
20 Calibration Record Last ten calibration information can be seen. (Time stamp,
Response Factor, Retention time) This function is available for
application of HGC (version 3.1 or later), HGM (version 4.70 or
later) and HDM (version 2.30 or later) combination.
21 Calibration Method 1 point [default] and 3 points calibration can be selected.1 point is
calibration using data of one analysis.3 points is calibration using
data of last three analysis average.This function is available for
application of HGC (version 3.1 or later) and HGM (version 4.70
or later) combination.
22 Operator Action Log Last ten operator action can be seen.(Time stamp, Setting action
of Configuration mode and Maintenance mode) This function is
available for application of HGC (version 3.1 or later) and HGM
(version 4.70 or later) and HDM (version 2.30 or later) combina-
tion.
Table 3-21 Description of component data table
Item Description
Component Component name
Cal. Gas Conc The component’s concentration in the cylinder for calibration
New PH Peak height of the last calibration
Old RF Last valid response factor
New RF Response factor of the last calibration
Table 3-20 Calibration factor setting
No. Display Description