Yamatake HGC303, Руководство пользователя

Страница: 48 / 130

Operation Yamatake Corporation
3-6 Model HGC303 - Heat Value Gas Chromatograph
Starting up the HGM with model HFA100
The procedure to start the HGM up are given below.
1. Make sure that both the model HGC303 and the model HMU303 are running normally.
2. Prepare a personal computer, which has the HGM installed.
3. Make sure the computer is running Windows 2000 / XP.
4. Verify that font size is [Small font] and the display resolution 1024 × 768 pixels.
5. Connect the model HFA100 along the FB line. (Refer to Figure 3-2.)
6. Connect the USB cable to the USB port of your PC.
7. Make sure that the model HFA100 configuration is correct.
8. Run the [hgm.exe] program
HGM operation flow chart with model HFA100
Here is a flow chart showing how to get the HGM online and it also gives an overview
of the HGM’s functions.
Start
[HGM.exe]
Main menu
Setup HGM
User's
manual
Quit
[HGM.exe]
User's mode
Configuration
mode
Monitoring Chromatogram
Heat value &
Total raw conc.
Carr.press.&
Oven temp.
Data save
C6+
configuration
Total raw
error limit
Ref. condition setting
for heat value cal.
PV output
selection
Low cut off
setting
% DEV RF
limit setting
Print out
Manual
calibration
Auto
calibration
Print out
Calibration
Report
Field work
End
: Main menu
Online