Yamatake HGC303, Руководство пользователя

Страница: 46 / 130

Operation Yamatake Corporation
3-4 Model HGC303 - Heat Value Gas Chromatograph
3-2 : Stopping the model HGC303
To stop model HGC303 operation, follow the procedures listed below.
3-3 : HGM operation
Introduction
The functions of the HGM are described in this chapter.
The HGM is a calibration, configuration and maintenance tool for the model HGC303.
Analysis statuses, process variables and a chromatogram are displayed on its screen,
and information is stored in a database to facilitate routine management and tuning.
~Note 1
There is a possibility that this software will not function properly if
another application software is used at the same time.
~Note 2 Please use a period “.” as a decimal symbol.
There is a possibility that analysis data will not save properly if a
comma “,” is used.
Select
Start >> Settings >> Control Panel >> Regional Settings and
then click on Number Tag
Set decimal symbol to period “.”.
Functions
(1) Monitoring heat value, chromatogram and carrier gas pressure / oven temperature
control
(2) Data save (load)
(3) User report
(4) Calibration
(5) Self-diagnostics
(6) Hold model HGC303 outputs to host control system
If using the model HFA100, proceed to the next page. If using the “PCMCIA-FBUS”, proceed to
section “3-3-2 : Getting started with PCMCIA-FBUS”.
Table 3-4 Stopping model HGC303 operation
Step Action
1 Shut off the process gas line.
2 Turn off the model HMU303 power.
3 Turn off the model HGC303 power.
4 Shut off the carrier gas line.
5 Shut off the valve operating gas line.
6 Refer to “ Storing the model HGC303” on page 2-2 when removing the
model HGC303 from the field.