Yamaha YZ125(W)/W1, Руководство по эксплуатации для владельца

Страница: 456 / 576

5-47
CHAS
HANDLEBAR
7. Install:
9
Roller
1
9 Collar
2
NOTE:
9 Apply the lithium soap base grease on the
roller sliding surface and cable guide.
9 Install the roller so that the “UPPER” mark
a
faces upward.
9 Pass the throttle cable in the groove
b
in the
roller.
8. Install:
9 Throttle cable cap
1
9 Screw (throttle cable cap)
2
9. Adjust:
9 Throttle grip free play
Refer to ”THROTTLE CABLE ADJUST-
MENT” section in the CHAPTER 3.
10. Install:
9 Cap cover
1
1 Nm (0.1 m•kg, 0.7 ft•lb)
6. Install:
9 Throttle cable
1
To tube guide
2
.
NOTE:
Apply the lithium soap base grease on the throt-
tle cable end and tube guide cable winding por-
tion.
5. Install:
9 Collar
1
9 Cap cover
2
9 Throttle
3
NOTE:
9 Apply the lithium soap base grease on the
throttle grip sliding surface.
9 Tighten the grip cap bolts temporarily without the
throttle being fixed to the handlebar.
1C3-9-32-5C 4/14/06 12:05 PM Page 12