4-28
ENG
CYLINDER HEAD, CYLINDER AND PISTON
3. Install:
9
Nut (cylinder)
1
NOTE:
Tighten the nuts in stage, using a crisscross pat-
tern.
4. Install:
9
Collar
1
9
Push rod
2
9
Plain washer
3
9
Bolt (push rod)
4
NOTE:
9
Set the collar
5
included in owner's tool kit to
install the bolt (push rod).
9
Do not forget to remove the collar.
EC4753A2
Cylinder head and cylinder
1. Apply:
9
Engine oil
To piston
1
, piston ring
2
and cylinder
surface.
2. Install:
9
Cylinder
1
c
C
Make sure the piston ring is properly posi-
tioned. Install the cylinder with one hand
while compressing the piston ring with the
other hand.
NOTE:
After installing, check the smooth movement of
the piston.
30 Nm (3.0 m•kg, 22 ft•lb)
5 Nm (0.5 m•kg, 3.6 ft•lb)
1C3-9-32-4B 4/6/06 2:10 PM Page 22
