KTM 1190 LED Light Bar instructions
Thank you for Choosing Cyclops Adventure sports for your Axillary lighting needs. If you are unfamiliar with adding
electrical devices to your motorcycle we recommend seeking professional assistance.
•
First start by removing the gas tank and all plastic panels to gain access to the KTM headlight.
•
Remove the bikes headlight and set it aside, make sure not to scratch the plastic lens.
•
Remove the belly pan around the forks (under the headlight)
Once you have the belly pan removed use the cyclops aluminum bracket as a guide and drill the two ¼ inch holes
for the Led light Bar mounts., make sure the mount ears are in the pockets where the two forward screws that
hold the belly pan on the bike.
•
Now drill the hole where the power cable for the Led light bar will go through, We
recommend using use a ¾ inch step bit or hole saw for this.