•
Use the included two Allen headed bolts for this, This part requires a ball end Allen
wrench and or a bit of patience, the bolts are not easy to get two, but doable. Use a pair
of small pliers to get the bolts into the hole then use the Allen wrench to tighten the
two bolts.
•
Once these are tight continue to tighten all the other belly pan bolts.
•
Reinstall your headlight loosely, As well as the gas tank.
•
This is the time to check your lights function, make sure everything works at this time.
•
If all is well, reinstall all the bikes plastic and seat.
•
Aim your LED headlight. There are two large Allen bolts, one on each end of the light
bar, after you get your LED light bar aimed where you want it, tighten these two bolts,
failure to do so will cause the light to rotate and possibly lose the cinch bolts.
www.Cyclopsadventuresports.com
206 715 1596 913 Industry Dr Tukwila wa
98188