Yamaha R1 Series 2015, Руководство по обслуживанию

Страница: 517 / 704

SIGNALING SYSTEM
8-36
The fuel level warning light fails to come on.
The oil pressure and coolant temperature warning light fails to come on.
QSS (Quick Shift System) does not operate.
1. Check the fuel sender.
Refer to “CHECKING THE FUEL
SENDER” on page 8-189.
NG
o
Replace the fuel pump assembly.
OK
p
2. Check the entire signaling system’s
wiring.
Refer to “CIRCUIT DIAGRAM” on
page 8-29.
NG
o
Properly connect or repair the signaling
system’s wiring.
OK
p
Replace the meter assembly.
1. Check the coolant temperature sen-
sor.
Refer to “CHECKING THE COOL-
ANT TEMPERATURE SENSOR”
on page 8-190.
NG
o
Replace the coolant temperature sensor.
OK
p
2. Check the entire signaling system’s
wiring.
Refer to “CIRCUIT DIAGRAM” on
page 8-29.
NG
o
Properly connect or replace the wiring har-
ness.
OK
p
Replace the ECU or meter assembly.
Refer to “REPLACING THE ECU (En-
gine Control Unit)” on page 8-180.
1. Check that the engine trouble and
system warning light does not come
on.
NG
o
Repair the faulty parts.
OK
p
2. Check that the QSS is working un-
der normal QSS operating condi-
tions.
NG
o
Check the QSS operating conditions ex-
plained in the owner’s manual and operate
the QSS accordingly.
OK
p
3. Make sure that the QSS is effective.
(Check whether the “QS” icon is dis-
played at the top of the meter.)
NG
o
Activate the QSS. (Set the QSS to a set-
ting other than “OFF”.)
OK
p
4. Check that the shift switch coupler
is connected.
NG
o
Connect the shift switch coupler.
OK
p