Yamaha R1 Series 2015, Руководство по обслуживанию

Страница: 305 / 704

FRONT FORK (for YZF-R1)
4-88
2. Tighten:
•
Lower bracket pinch bolts “1” and “2”
TIP
Tighten each bolt to 23 Nm (2.3 m·kgf, 17 ft·lbf)
in the order pinch bolt “1”
o
pinch bolt “2”
o
pinch bolt “1”
o
pinch bolt “2”.
3. Tighten:
• Cap bolt “1”
•
Handlebar bolt “2”
• Handlebar pinch bolt “3”
•
Upper bracket pinch bolt “4”
TIP
When installing the front fork legs, make sure
that the spring preload adjusting nuts are posi-
tioned at the angles shown in the illustration.
4. Check:
• Cable routing
TIP
Make sure the brake hose, throttle cables, clutch
cable, and handlebar switch leads are routed
properly. Refer to “CABLE ROUTING” on page
2-51.
5. Install:
• Plastic locking tie “1”
TIP
Fasten the front brake hose to the right front fork
leg with the plastic locking tie.
6. Adjust:
•
Spring preload
• Rebound damping
•
Compression damping
Lower bracket pinch bolt
23 Nm (2.3 m·kgf, 17 ft·lbf)
Front fork cap bolt (for YZF-R1)
23 Nm (2.3 m·kgf, 17 ft·lbf)
Handlebar bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
Handlebar pinch bolt
32 Nm (3.2 m·kgf, 23 ft·lbf)
Upper bracket pinch bolt
26 Nm (2.6 m·kgf, 19 ft·lbf)
a
T
R
.
.
1
2
T
R
.
.
T
R
.
.
T
R
.
.
T
R
.
.
3
4
2
1
55-65
°
55-65
°
1