Yamaha R1 Series 2015, Руководство по обслуживанию

Страница: 639 / 704

ELECTRONICALLY ADJUSTABLE SUSPENSION SYSTEM (for
YZF-R1M)
8-158
Fault code No. 10
Fault code No. 42
Fault code No. 10
Item Abnormal CAN communication (between ABS ECU and SCU)
Fail-safe system Able to start engine
Able to drive vehicle
Diagnostic code No. —
Indicated —
Procedure —
Item Probable cause of
malfunction and check
Maintenance job Confirmation of service com-
pletion
1 Connection of ABS ECU cou-
pler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
Improperly connected
o
Con-
nect the coupler securely or
replace the wire harness.
Turn the main switch to “OFF”
and back to “ON” and check the
warning light.
The warning light does not
come on
o
Service is finished.
The warning light comes on
o
Go to item 2.
2 Wire harness continuity. Open or short circuit
o
Replace
the wire harness.
Between SCU coupler and joint
coupler.
blue/white–blue/white
blue/black–blue/black
Between the joint coupler and
ABS ECU coupler.
blue/white–blue/white
blue/black–blue/black
Turn the main switch to “OFF”
and back to “ON” and check the
warning light.
The warning light does not
come on
o
Service is finished.
The warning light comes on
o
Go to item 3.
3 Malfunction in ABS ECU. Replace the hydraulic unit
assembly.
Fault code No. 42
Item Abnormal rear wheel sensor
Fail-safe system Able to start engine
Able to drive vehicle
Diagnostic code No. —
Indicated —
Procedure —
Item Probable cause of
malfunction and check
Maintenance job Confirmation of service com-
pletion
1 Abnormal rear wheel sensor Check the item of fault code No.
42 for the ECU.
Refer to “SELF-DIAGNOSTIC
FUNCTION AND DIAGNOS-
TIC CODE TABLE (ECU)” on
page 9-5.
Turn the main switch to “OFF”
and back to “ON” and check the
warning light.
The warning light does not
come on
o
Service is finished.
The warning light comes on
o
Refer to the item corresponding
to fault code.