4. Remove the front end cap (D,
Figure 17
) from
the housing and remove the locating key (
Figure
20
). It could come out with the end cap or it could
remain in the housing.
5. Lift each planetary gear (
Figure 21
) from its
post in the front end cap.
6. Remove the ring gear (
Figure 22
). Note that its
male index faces down and engages the recess in the
ring gear holder.
7. Remove the ring gear holder (
Figure 23
) and
washer (
Figure 24
) from the front end cap.
8. Remove the gear plate (
Figure 25
) from the ar-
mature housing.
9. Slide the washers (
Figure 26
) from the armature
shaft.
10. Remove the rear end cap (A,
Figure 27
) from
the armature housing.
NOTE
Count and label the number of shims
removed in Step 11. These shims must
be reinstalled in the order in which
they are removed. Do not mix these
shims with other washers or shims.
250
CHAPTER NINE
19
20
21
22
23
24
